Abrasive Velcro cloth is a great flexible base material for industrial grinding, cleaning and polishing. It is wear-resistant, tear-proof and fits well, and it holds sand firmly. So it works great for composite abrasives. We can make it into flocked sandpaper, industrial scouring pads or sponge sand blocks. These products serve metalwork, wood manufacturing, auto care, electronics and home building. They handle rough grinding, fine polishing, stain removal and burr cleaning well.
Sanding disc
sanding disc is the most common product of abrasive velcro cloth. First, we stick the cloth and sandpaper tightly by flocking backing craft. And its sticky surface lets us install or take it off air and electric sanders fast, so it improves work efficiency a lot. Also, this cloth is the key part for the sandpaper’s quality.
Besides, it uses thick short fibers that line up well and keep even height. What’s more, it holds glue strongly and runs smoothly at high speed without shedding or fuzzing. Further, it fits curved and corner parts well to avoid missing any spots. Additionally, it locks sand firmly and lasts 30% longer than normal sandpaper.
Moreover, it lets heat out quickly to stop workpieces from breaking or paint burning. Finally, it leaves no glue and fits assembly line work, and it works for wood, metal, auto, construction and 3C parts in dry or wet grinding.
Industrial Scouring Pad
We make industrial scouring pads from tough long-fiber abrasive velcro cloth. We add hard abrasives to it to form an open net shape. This pad is stronger than household ones. It is wear-resistant and does both grinding and cleaning. The cloth is tough, not easy to tear or break. It bends well to reach small corners and won’t scratch smooth surfaces. It works wet or dry, resists oil and dirt, and lasts 2-3 times longer. We can cut it freely, and it cleans metal, kitchenware, cars and electronic parts well.
Sponge Sand
Sponge sand has three layers: abrasive velcro cloth, dense sponge and sandpaper. First, the cloth sticks layers firmly together. Next, the sponge gives nice flexibility.
This solves two big problems: hard sandpaper leaves marks, and it cannot grind shaped parts well. We use tight, short-nap cloth for this product. It sticks well and stays hard, so the three layers never separate or bend up. Also, it spreads grinding pressure evenly. It does not over-grind any part, and leaves no marks on shaped workpieces.
The cloth uses strong glue that resists heat and water. It stays tight even after washing, so we can reuse it many times. Its surface is not too smooth, so hands hold it easily without slipping. It lets dust out quickly, keeps polishing well, and fits fine work on crafts, cars and electronic parts.
Conclusion
Customize Abrasive velcro cloth to fit different finished products.
For flocked sandpaper, it features high fitness and great wear resistance for fast machine work.Used in industrial scouring pads, it shows high toughness and rub resistance to grind and clean together.When matched with Sponge Sand, it focuses on strong adhesion, steady force transfer and washability for fine polishing.
These three tailored products complement each other perfectly.They cover all industrial surface treatment scenes in full aspects.They are the key to improving processing quality and cutting consumable costs.
